High electricity costs are holding back investment in UK manufacturing. In a survey published by Make UK and Ecotricity Business, 87% of manufacturers said they would invest more if electricity costs were reduced.
The July 2026 findings, published by Make UK and Ecotricity Business, also show that more than half of respondents see energy costs as their biggest business challenge. While energy prices need wider action, manufacturers can examine how their own facilities use energy. This article explores the role of monitoring, layout, building systems and flexible space in managing costs and supporting future growth.
The pressure is especially acute for businesses that depend on power-intensive processes. Paper, petrochemical, metals, glass and ceramics manufacturers often depend on high-temperature processes and energy-intensive equipment. Food and drink manufacturers also have to manage refrigeration, heating and ventilation across different parts of the same site. Where processes or cold storage run around the clock, those demands continue outside normal working hours.
The Office for National Statistics analysis shows how sustained that pressure has been. The average electricity price for UK non-domestic users peaked in the final quarter of 2023. By the final quarter of 2024, it was still 75% higher than at the start of 2021.
The average gas price peaked in the first quarter of 2023 and was still more than double its early 2021 level by the end of 2024. With those pressures in mind, Portakabin, a modular building manufacturer, considers how manufacturers could adapt their facilities, from making better use of existing space to planning new capacity more carefully.
Energy costs are becoming a facilities issue
The first step is understanding not only how much energy a site uses, but where, when and why it is being used. A manufacturing facility can contain production lines, storage areas, laboratories, offices and staff facilities, all with different energy needs.
A site-wide figure may show that consumption has increased, but it will not explain whether that increase is being caused by an inefficient process, equipment being left on between shifts or heating and lighting being used in a part of the building that is rarely occupied.
Submetering, equipment-level monitoring and building management systems can provide a clearer picture. Comparing this information with production volumes, working hours and occupancy can help manufacturers see which energy use is necessary and where energy is being wasted.
Manufacturers often focus first on the energy used by machinery, but the space around production matters too. Heating, lighting or ventilating areas that are no longer used in the same way can add to running costs, so the layout of a site needs to keep pace with the way the business operates.
Simon Pollard, Manufacturing Director, Portakabin
Technology is also making this information easier to collect and act on. In April 2025, Siemens launched an AI-based system that continuously monitors industrial drive systems, including motors and pumps. It analyses load, power consumption and energy use before suggesting changes to controls, maintenance schedules and load distribution.
Siemens says the system can reduce the energy used by a drive system by between 10% and 20%. It is one example of how manufacturers can use data to make more informed decisions about equipment and future investment.
For larger manufacturers that have to comply with the Energy Savings Opportunity Scheme, energy audits provide another way to find potential savings. Government guidance for the latest phase of ESOS says these audits can help improve profitability and competitiveness by identifying cost-effective changes. However, the savings will only come when businesses act on the findings rather than treating the audit as another compliance task.
Making existing space work harder
Once manufacturers understand how energy moves through a facility, they can begin to look at whether the layout still works for the way their business operates today.
Production areas often change gradually as new equipment, product lines and teams are introduced. Over time, processes that rely on one another can become separated, creating longer journeys for materials and employees. Some areas may also continue to be heated, cooled, ventilated or lit despite only being used occasionally.
Changing the layout can bring connected parts of the production process closer together and reduce the amount of movement required across the site. It may also allow businesses to stop using certain areas on a daily basis.
Where it makes sense and can be done safely, manufacturers can group activities with similar temperature, ventilation or hygiene requirements. This can make it easier to control individual areas rather than running the whole building in the same way.
Bringing operations into fewer areas does not necessarily mean reducing output. It can mean making better use of the most suitable parts of a site and using the space released for storage, future equipment or work that does not have the same energy requirements.
Moving machinery or changing production areas needs careful planning. Manufacturers must consider safety, maintenance access, utilities and how work will continue while changes are made. The goal is to make the layout work better for the business, rather than simply fitting more into less space.
Simon Pollard, Manufacturing Director at Portakabin said: “Manufacturers often focus first on the energy used by machinery, but the space around production matters too. Heating, lighting or ventilating areas that are no longer used in the same way can add to running costs, so the layout of a site needs to keep pace with the way the business operates.”
The building is part of the production system
Manufacturers are also paying closer attention to the building around their equipment. Insulation, airtightness and well-maintained doors can reduce heat loss. Zoned heating, LED lighting, daylight-linked controls and heat-recovery ventilation can also reduce the energy used across occupied areas.
Regular maintenance is just as important. Leaking compressed-air systems, controls that have not been set correctly or ventilation systems that are not working properly can all increase costs without improving production.
The changes required will be different for every site. A facility that produces large amounts of waste heat may be able to recover and reuse it. Another may benefit more from better controls, on-site energy generation or replacing older heating and ventilation systems.
A manufacturing facility is not simply a shell around production. Its layout, condition and systems affect the amount of energy needed to maintain safe working conditions, protect materials and keep production running.
Planning for growth without creating unnecessary space
Long-term changes in manufacturing can require much bigger changes to facilities.
Manufacturers may require additional laboratories, offices, training rooms, welfare facilities or other space supporting production before they know whether a new process, contract or production line will create permanent demand.
Building too little can restrict growth. However, creating more space than is needed can leave a business heating, lighting and maintaining an underused facility for years.
This is where having greater flexibility can help. A modular building can be designed around what a manufacturer needs now and later extended, reduced, relocated or reconfigured as production requirements and energy demands change.
This gives businesses the space to grow without assuming that today’s requirements will remain the same throughout the life of the site.
For projects where energy use is a key consideration, the specification is just as important as the construction method. Sustainable modular buildings can include energy-efficient LED lighting, smart lighting controls, passive ventilation, heat-recovery ventilation and lower-carbon options such as heat pumps. The space can therefore be designed around how it will actually be used.
Because modules are manufactured off site, preparation at the factory can take place at the same time as building work elsewhere. On-site installation still needs careful planning around access and utilities, but this approach can limit the time construction takes place alongside production. It can help manufacturers add supporting space while keeping existing operations running where the site and project allow.
Simon Pollard, Manufacturing Director added: “Energy monitoring can show manufacturers where power is being used, while AI-based tools can help identify patterns such as consumption remaining high outside production hours. The next step is to assess whether existing space and its systems match operational needs. Offices used for certain shifts, for example, may need different heating, lighting and controls from production areas operating around the clock.
“When planning manufacturing accommodation, it’s important to assess whether existing areas could be adapted or used more efficiently before adding space. Where additional offices, laboratories or welfare facilities are needed, operating hours, energy performance and long-term running costs should inform the design. Flexible space planned around actual use can help manage energy demand as production needs change.”
Preparing facilities for future change
Manufacturers cannot control global energy prices, but they can take steps to reduce the effect sudden changes have on their day-to-day operations.
There is unlikely to be one technology or one building project that provides the whole answer. Businesses will need to combine better energy data with more efficient equipment, layouts that reflect how production currently works and facilities that can change alongside the business.
The most useful industrial space may not simply be the space that uses the least energy today. It may be the space that can continue to work efficiently as production, technology and demand change in the years ahead.
For more articles like this, visit our Sustainability channel



