The UK manufacturing upturn continued at the end of the second quarter, according to the latest figures from S&P Global.
June saw output and new orders both expand for the second successive month, with rates of expansion remaining close to the highs reached in May. There was a modest upswing in cost inflationary pressures, with input prices rising at the quickest pace since January 2023.
The seasonally adjusted S&P Global UK Manufacturing Purchasing Managers’ Index™ (PMI®) registered 50.9 in June, down slightly from May’s 22-month high of 51.2 and below the earlier flash estimate of 51.4. The PMI has posted above the neutral 50.0 mark – signalling expansion – in each of the past two months.
Three out of the five PMI components were at levels consistent with improved operating conditions in June, as output and new orders expanded and suppliers’ delivery times lengthened. In contrast, stocks of purchases and employment both decreased.
June saw production volumes scaled up for the second successive month, as companies reacted to rising intakes of new orders and ongoing efforts to clear backlogs of work. The rate of output growth was solid and only slightly below the 25-month high achieved in May. The expansion remained broad-based by sub-sector, with growth registered across the consumer, intermediate and investment goods categories.
Data broken down by company size provided a more mixed picture. Output growth was confined to large-scale producers, as contractions were signalled for both small and mediumsized enterprises. The same trend was seen for demand, with new orders rising at large firms and falling at SMEs.
Measured overall, new business intakes rose for the third time in the past four months. New order growth was linked to improved demand, greater levels of market activity, product promotions and an end of destocking at some clients. Gains registered at both consumer and investment goods producers more than offset a further decrease in new work in the intermediate goods category (although the downturn in the latter eased).
The continued upturn in new business was mainly driven by the domestic market, as inflows of new work from overseas declined for the twenty-ninth month in a row. There were reports of lower intakes from clients in North America, China, Germany, France, Italy, Sweden, the Middle East and Poland. Part of the latest decline was linked to shipping delays and rising freight costs, both of which were often the result of the Red Sea crisis.
Manufacturers maintained a positive outlook in June, reflecting expectations for a market recovery, planned growth strategies, new product launches and promotional activities. Optimism stayed close to May’s 27-month high, with 57% of firms expecting output to rise over the coming year. Some firms noted feeling uncertain due the forthcoming General Election, while others expected this to reduce following its conclusion.
June nonetheless saw manufacturers maintain a strong focus on costs and protecting cash flow where possible. This resulted in job losses, a reduction in non-essential purchasing and efforts to run leaner stock holdings.
On the costs front, June saw average purchase prices rise for the sixth successive month and at the quickest pace since January 2023. Companies continued to report a wide range of inputs as up in price, including energy, food, metals, packaging, paper, plastics and timber. Tight supply lines, higher import costs and freight (air, land and sea-based) issues also contributed to higher purchase prices. Increased costs led to higher selling prices, which rose for the eighth successive month.
Commenting on June’s PMI figures, Rob Dobson, Director at S&P Global Market Intelligence, said: “The UK manufacturing sector is enjoying its strongest spell of growth for over two years, with June seeing output and new order growth sustained at robust rates similar to May’s recent highs. The performance of the domestic market remains a real positive, providing a ripe source of new contract wins. In contrast, the ongoing weak export performance is concerning, with manufacturers reporting difficulties in securing new business in several key markets including the US, China and mainland Europe. “Although June also saw manufacturers maintain a relatively high degree of optimism towards the future, this was not sufficient to lessen their focus on cost minimisation and cash flow protection. This led to further job losses, cuts to non-essential spending and efforts to operate on leaner stock holdings. This is coming from a backdrop of renewed cost inflation pressure, with manufacturers’ input prices now rising at the quickest pace since the start of 2023. This renewed upward lurch in manufacturing prices will likely add to concerns over the potential stubbornness of underlying inflationary pressures among hawkish rate setters at the Bank of England.”
June UK Manufacturing PMI reactions
Maddie Walker, Industry X lead for Accenture in the UK, said: “It is hugely welcome news to see the manufacturing industry maintain its return to growth. Whilst the industry should always remain wary of unforeseen issues in such an unpredictable time, there is a well-placed sense of increasing confidence that last year’s consistent decline now lies firmly in the rear-view mirror.
“Last month saw a rise in both output and new orders for the second month in a row, driven by the domestic market. It is also reassuring to see that UK manufacturers’ optimism has remained strong despite inflationary pressures increasing at a pace not seen in well over a year.
“Nonetheless, with this growth, coupled with an expected fall in interest rates over the next 6 months, manufacturers must prioritise investing in areas that will help secure greater productivity and efficiency for the long term.”
Richard Powell, partner at MHA, comments on today’s PMI manufacturing data: “Manufacturing PMI has remained flat but this was to be anticipated as we’re in the run-up to an election. In addition, interest rates remain stubbornly high, and manufacturers are sitting on their hands until they are sure that the cuts will happen. However, even once rates start to fall, there will be a lag before investment starts to flow.
“While these are immediate challenges, there are some fundamental issues that the incoming government, of whichever colour, will have to address to support the sector. Labour shortages are still commonplace and are not going to be fixed overnight. Manufacturers are also struggling with exporting to the EU, the UK’s biggest trading partner, eight years post-Brexit.
“These issues can only be resolved through significant investment in the industry. Over the last few decades, there has been a lack of a well-defined plan to support manufacturers, which has led to closures. Although it sounds as though the manufacturing industry is finally being listened to as the recent party manifestos make reference to the importance of having an industrial strategy.
“Manufacturers have been calling out for this for many years; hopefully the next government will deliver.”
Mike Thornton, national head of manufacturing at RSM UK, said: “Despite a slight fall, the manufacturing PMI in June continues to show steady signs of recovery at 50.9, after reaching its highest level since July 2022 last month. However, manufacturers aren’t out of the woods yet, as new export orders fell to 48, showing that while many indices have improved and things are moving in the right direction, there’s a disconnect between economic recovery in the UK and globally. While export markets in Europe and China have seen a downturn, we’d expect UK exports to be performing similarly to the US, yet it appears UK manufacturing growth is currently limited to domestic demand, as reflected in last month’s uplift in output to 53.3, up from 52.7 in May.
“Input prices also jumped sharply to 56.3 in June, highlighting some fragility in the supply chain, with price pressures remaining a challenge. This could be due to a number of reasons, including UK manufacturers’ reliance on importing materials from Europe, June’s electricity price rises, and increases to national minimum wage rates. But, more encouragingly, it could also reflect increased demand, given the headline PMI has remained above 50 for the second consecutive month, with growth driving competition and therefore impacting prices.
“Backlogs of work also rose to 46, showing that production output is on the rise, and the industry continues to recover gradually. Additionally, stocks of finished goods fell to 45.2, further implying that consumer confidence and spending are growing. With this week’s general election looming, industry needs the next government to prioritise an industrial strategy, providing manufacturers with a framework to make informed decisions and invest for the future.”
Yselkla Farmer, CEO of BEAMA, the UK trade association for energy infrastructure and systems, said: “The latest S&P Global UK Manufacturing PMI shows continued signs of growth for our industry, with another month of a marked upward trend.
“According to our BEAMA members, the labour market still presents its own set of challenges, such as finding new starters locally, a lack of technically qualified staff and continued high wage demands. However, it’s important to note the resilience of our sector, despite increasing manufacturing costs including raw materials and energy. Manufacturers are actively prioritising orders, using outsourced production and exploring strategies to enhance capacity where feasible. Moreover, with inflation now at the Bank of England’s 2% target, hope of an interest rate cut on the horizon gives cause for cautious optimism in consumer markets for the coming months.
“As we approach a change in government, it’s crucial that the incoming leadership recognises and supports the manufacturing industry’s vital role in the UK economy. Representing nearly a quarter of UK GDP, our sector requires continued focus on policies around skills, education, and financial support to sustain this growth trajectory and enhance our global competitiveness. We look forward to engaging with the new government to ensure our industry’s voice is heard and our needs are met as we work towards sustained growth and innovation.”
For more articles like this, visit our Leadership channel